LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1752 (Body Front End) >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
  1. Open and support the hood.
    2. Fig 1: Hood Hold-Open Rod
    GM928830Courtesy of GENERAL MOTORS CORP.
  2. Push the rod toward the engine and twist rod out of the bushing.
  3. Remove rod from vehicle.
scientia non olet · About LEMON Manuals