LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1752 (Body Front End) >> Repair Instructions >> Hood Adjustment

Hood Adjustment

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Loosening Hinge To Body Bolts To Adjust Hood Fore Or Aft
    GM929681Courtesy of GENERAL MOTORS CORP.
  1. Loosen the hinge to body bolts to adjust the hood fore and aft, and cross-vehicle. Position the hood as needed.
  2. Fig 2: Tightening Hinge Bolts For Hood Bumpers
    GM929673Courtesy of GENERAL MOTORS CORP.
  3. Adjust the hood bumpers to adjust the hood up and down at the front of the hood.
  4. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  5. Tighten the hinge bolts.

    Tighten:  Tighten the hinge-to-body bolts to 25 N.m (18 lb ft).