LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1751 (Body Rear End) >> Repair Instructions >> Wedge Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wedge Plate
    GM930906Courtesy of GENERAL MOTORS CORP.
  1. Position the wedge plate to the vehicle.
  2. Install the rivets into the wedge plate.
  3. Close the lift gate, checking for proper engagement of the wedge plate to the lift gate.