LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1751 (Body Rear End) >> Repair Instructions >> Strut Ball Stud Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lift Gate Side Strut Anchor
    GM930695Courtesy of GENERAL MOTORS CORP.
    CAUTION: When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
  1. Open the lift gate and support.
  2. Remove the lift gate struts, one at a time. Refer to Strut Replacement - Liftgate  .
  3. Remove the lift gate side strut anchor.
    4. Fig 2: Body Side Strut Anchor
    GM930701Courtesy of GENERAL MOTORS CORP.
  4. Remove the body side strut anchor.
scientia non olet · About LEMON Manuals