LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1751 (Body Rear End) >> Repair Instructions >> Pressure Relief Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Relief Valve
    GM930652Courtesy of GENERAL MOTORS CORP.
  1. Position the relief valve to the vehicle.
  2. Push on the relief valve to secure the valve to the vehicle.
  3. Install the right rear interior trim panel. Refer to Trim Panel Replacement - Rear Quarter Lower in Interior Trim.