LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1751 (Body Rear End) >> Repair Instructions >> Lock Striker Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lift Gate Striker
    GM930660Courtesy of GENERAL MOTORS CORP.
  1. Align the striker to the marks made in the removal procedure.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the lift gate striker bolts.

    Tighten:  Tighten the lift gate striker retaining bolts to 25 N.m (18 lb ft).

  3. Check lift gate closing efforts and align striker as required. Refer to Lock Striker Adjustment  .
  4. Close the lift gate.
scientia non olet · About LEMON Manuals