LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1751 (Body Rear End) >> Repair Instructions >> Lock Cylinder Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Connecting Lock Cylinder Rod
    GM943461Courtesy of GENERAL MOTORS CORP.
  1. Install the lift gate lock cylinder gasket, if removed.
  2. Connect the lock cylinder rod to the lock cylinder lever.
  3. Install the lift gate lock cylinder to the outside handle.
  4. Install the lift gate trim panel. Refer to Trim Panel Replacement - Liftgate  .
  5. Close the lift gate.
scientia non olet · About LEMON Manuals