LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1751 (Body Rear End) >> Repair Instructions >> Handle Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lift Gate Handle
    GM928836Courtesy of GENERAL MOTORS CORP.
  1. Open the lift gate.
  2. Remove the lift gate trim panel. Refer to Trim Panel Replacement - Liftgate  .
  3. Remove the lock cylinder. Refer to Lock Cylinder Replacement - Liftgate  .
  4. Disconnect the outside handle swing over clip from the outside handle rod.
  5. Remove the lift gate outside handle bolts.
  6. Remove the lift gate handle from the lift gate.
scientia non olet · About LEMON Manuals