LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1750 (Interior Trim) >> Repair Instructions >> Panel Replacement - Rear Compartment Closeout >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Positioning Load Floor Into Vehicle
    GM987601Courtesy of GENERAL MOTORS CORP.
  1. Position the load floor into the vehicle.
  2. Fig 2: Rear Load Floor Lock Lever
    GM987444Courtesy of GENERAL MOTORS CORP.
  3. If the vehicle is equipped with slider locks, push the locks outward to engage the load floor.
  4. Fig 3: Load Floor Forward Cover
    GM977958Courtesy of GENERAL MOTORS CORP.
  5. Position the front load floor panel into the vehicle.
  6. Press at the Velcro® locations to secure the floor panel.