LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1750 (Interior Trim) >> Repair Instructions >> Molding Replacement - Rear Window Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Upper Garnish Molding
    GM981002Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate.
  2. Gently pull on the molding to disengage the clips.
  3. Remove the molding.
scientia non olet · About LEMON Manuals