LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1750 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Rear Corner >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Upper Garnish Molding
    GM1246682Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear upper garnish molding. Refer to Molding Replacement - Rear Window Upper .
    2. Fig 2: Disengaging Rear Corner Molding
    GM1246719Courtesy of GENERAL MOTORS CORP.
  2. Pull up and disengage the rear corner molding.
  3. Remove the corning molding from the vehicle.
scientia non olet · About LEMON Manuals