LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1750 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Center Pillar Lower >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Center Pillar Lower Garnish Molding
    GM965599Courtesy of GENERAL MOTORS CORP.
  1. Disable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in SIR.
  2. Move the front seat to the forward position.
  3. Remove the rearmost clip from the hinge pillar garnish molding.
  4. Remove the rear carpet retainer. Refer to Carpet Retainer Replacement - Rear .
  5. Remove the center pillar upper molding. Refer to Garnish Molding Replacement - Center Pillar Upper .
    6. Fig 2: Molding
    GM977169Courtesy of GENERAL MOTORS CORP.
  6. Starting at the top of the lower garnish molding, pull at the clip locations to disengage the clips.
  7. Remove the molding.
scientia non olet · About LEMON Manuals