Installation Procedure
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Position the upper and lower shrouds.
- Apply light pressure until they snap in place.
- Install the ignition switch bezel.
- Install the shroud fasteners.
Tighten: Tighten the lower steering column cover screws to 1.5 N.m (13 lb in).
- Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in SIR.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.