Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Wiper Arm Assembly

Courtesy of GENERAL MOTORS CORP.

Position wiper blade assembly on the first rear window defogger grid line above the blackout strip as shown in the illustration.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the rear wiper arm nut.
Tighten: Tighten the nut to 27 N.m (20 lb ft).
Install the rear wiper arm finish cap.
Operate the windshield wipers and inspect for proper operation.