LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1746 (Wiper System And Washer System) >> Repair Instructions >> Washer Hose Replacement - Rear >> Rear Washer Hose Routing

Rear Washer Hose Routing

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

The rear washer hose is a component of the main body wire harness assembly. The rear washer hose is a hard plastic convoluted tube that is wrapped in the electrical tape along with the main body wiring harness. It starts underhood where it connects to the rear washer solvent container hose, this is rubber tubing. The rear washer hose routes into the main body wire harness underhood and passes through the front of the dash. The rear washer hose runs inside the vehicle interior along the left side rocker and over the left rear wheel housing. The rear washer hose is then routed up the left side pillar where it connects to the rear washer nozzle hose, where it is rubber tubing, at the top of the lift gate opening.