Installation Procedure
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shoulder belt height adjuster with the fasteners.
Tighten: Tighten the fasteners to 40 N.m (30 lb ft).
- Install the center pillar upper garnish molding. Refer to Garnish Molding Replacement - Center Pillar Lower in Interior Trim
- Operate the shoulder belt to ensure proper installation.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.
IMPORTANT:
Apply Permatex® 24200 on all restraint fasteners prior to installation.