LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1743 (Seat Belts) >> Repair Instructions >> Seat Belt Buckle Replacement - Front (Quick Connect) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Depressing Button On Seat Buckle Quick Disconnect Using Flat-Bladed Tool
    GM977256Courtesy of GENERAL MOTORS CORP.
  1. Using a small flat-bladed tool, depress the button on the seat buckle quick disconnect while pulling up on the shoulder belt to disengage the shoulder belt from the front seat.
  2. Remove the front seat from the vehicle. Refer to Seat Replacement - Front Bucket in Seats.
  3. Fig 2: Removing Trim Panel From Seat
    GM987165Courtesy of GENERAL MOTORS CORP.
  4. On the driver side, using a 90-degree pair of pliers, pull firmly on the recliner and riser handle cover to remove the handle cover.
  5. Fig 3: View Of Front Seat Back Recliner Trim Panel
    GM981031Courtesy of GENERAL MOTORS CORP.
  6. On the passenger side, remove the recliner side cover fastener and remove the cover.
  7. Fig 4: Side Trim & Fasteners
    GM981027Courtesy of GENERAL MOTORS CORP.
  8. Remove the side trim fasteners and remove the side trim.
  9. Fig 5: Shoulder Belt Quick Disconnect Bolt
    GM987242Courtesy of GENERAL MOTORS CORP.
  10. Remove the fastener and remove the shoulder belt quick disconnect.