LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1740 (Mirror System & Window System) >> Repair Instructions >> Windshield Upper Reveal Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The windshield molding can only be replaced by removing the windshield and then removing and installing a new windshield molding.
  1. Remove the windshield. Refer to Windshield Replacement .
    2. Fig 1: Upper Windshield Molding
    GM929841Courtesy of GENERAL MOTORS CORP.
  2. Remove the upper windshield molding from the windshield using a scraper to cut the adhesive from the windshield surface and edge. This may take several passes to remove all of the adhesive.
  3. Clean the old adhesive from the glass using isopropyl alcohol.
scientia non olet · About LEMON Manuals