Switches of the Inside Rearview Mirror with the Automatic Day-Night Feature, Compass/Temperature Display with OnStar®
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
The inside rearview mirror has four switches that perform the following functions:
- The on/off switch located at the left side of the mirror performs the following functions:
- To enable or disable the automatic day-night feature of the mirror. With the ignition in the ON position, depress and hold the on/off switch for approximately 6 seconds to enable the automatic day-night feature of the mirror. A green indicator will illuminate on the mirror when the automatic day-night feature is enabled. To disable the automatic day-night feature of the mirror, depress and hold the on/off switch for approximately 6 seconds.
- To turn the compass/temperature display on and off. With the ignition in the ON position, depress the on/off switch to turn the compass/temperature display to Fahrenheit (°F). Depress the on/off switch again to turn the compass/temperature from Fahrenheit (°F) to Celsius (°C). Depress the on/off switch again to turn off the display. The on/off switch is also used to place the compass into a calibration or zone mode. For more information, refer to Compass Calibration and Variance Procedure .
- The three switches on the right side of the mirror are for OnStar® operation. For more information, refer to OnStar Description and Operation in Cellular Communications.