LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1738 (Seats) >> Repair Instructions >> Seat Back Recliner Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat assembly. Refer to Seat Replacement - Rear .
    2. Fig 1: Disconnecting/Connecting Seat Recliner Cable
    GM987263Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the seat recliner cable from the recliner mechanism on both folding seat backs.
    3. Fig 2: Shoulder Belt Anchor Bolt & Plate
    GM986666Courtesy of GENERAL MOTORS CORP.
  3. Remove the shoulder belt anchor bolt and plate from the recliner assembly.
    4. Fig 3: View Of Lower J-Hook Retainer
    GM981476Courtesy of GENERAL MOTORS CORP.
  4. Remove the J-hook retainer from the passenger side seat back.
  5. Remove the outboard seat back bolt.
    6. Fig 4: Inboard Seat Back Bolts
    GM986347Courtesy of GENERAL MOTORS CORP.
  6. Lift the seat back trim cover enough to expose the inboard bolts.
  7. Remove the inboard bolts.
  8. Remove the passenger side rear seat back.
  9. Disconnect the lower J-hook retainer on the driver side rear seat back.
  10. Remove the outboard seat back bolt.
  11. Lift the trim cover enough to expose the inboard bolts.
  12. Remove the inboard seat back bolts.
    13. Fig 5: Inboard Side Fasteners
    GM986362Courtesy of GENERAL MOTORS CORP.
  13. Remove the driver side seat back.
    14. Fig 6: Recliner Fasteners
    GM1237409Courtesy of GENERAL MOTORS CORP.
  14. Remove the fasteners that secure the seat cushion frame to the seat recliner. Remove the seat recliner mechanism.
  15. Remove the rear seat back recliner assembly.
scientia non olet · About LEMON Manuals