LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1738 (Seats) >> Repair Instructions >> Lumbar Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat back pad and cover. Refer to Seat Back Cover and Pad Replacement - Front (Non-Fold Flat)  or Seat Back Cover and Pad Replacement - Front (Fold Flat) .
  2. Adjust the lumbar knob until the lumbar is at the position of the least support.
    3. Fig 1: Front Lumbar
    GM987766Courtesy of GENERAL MOTORS CORP.
  3. Remove the lumbar cable end from the lumbar unit by compressing the unit while lifting out the barrel end of the cable assembly.
    4. Fig 2: Twisting Lumbar Unit Using Flat-Bladed Tool
    GM987798Courtesy of GENERAL MOTORS CORP.
  4. Using a flat-bladed tool, twist out the upper portion of the lumbar unit from the seat frame cross wire.
    5. Fig 3: Lumbar Unit
    GM987938Courtesy of GENERAL MOTORS CORP.
  5. Remove the lower portion of the lumbar unit from the seat cross wire.
  6. Remove the lumbar unit.
scientia non olet · About LEMON Manuals