LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1727 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Instrument Panel Cluster
    GM891893Courtesy of GENERAL MOTORS CORP.
  1. Connect the I/P cluster harness.
  2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the I/P cluster in the I/P housing. Install and tighten the fasteners.

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

  4. Install the I/P cluster trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
  5. Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .