Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Floor Console Cup Holder

Courtesy of GENERAL MOTORS CORP.

Install the cup holder to the track.
Position the track in the console assembly.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the console track screws.
Tighten: Tighten the screw to 2.5 N.m (22 lb in).
Install the front floor console. Refer to Console Replacement - Front Floor .