LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1727 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Accessory Power Receptacle Replacement - Floor Console >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuse located in the I/P fuse block.
  2. Lift the tether cap and locate 2 square holes in the receptacle.
  3. Hold J 42059 at a 30-degree angle as you insert the tool into the receptacle.
  4. Position one side of the tool in each hole.
  5. Pull the receptacle straight out.
  6. Disconnect the connector and remove the receptacle.
scientia non olet · About LEMON Manuals