LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1726 (Engine Cooling) >> Repair Instructions >> Hoses and Clamps Inspection >> Clamp Positioning

Clamp Positioning

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Hose clamps have been positioned at the factory for ease of assembly and removal in service. The clamps must be installed in the designed position to prevent damage to other components.
    Fig 1: Clamp Positions
    GM873187Courtesy of GENERAL MOTORS CORP.
  1. All Positions are given from the hoses point of view.
  2. Clamp Positions:
    • 12 o'clock
    • 3 o'clock
    • 6 o'clock
    • 9 o'clock