Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Coolant Heater & Seal To Engine Block

Courtesy of GENERAL MOTORS CORP.

Install the seal to the coolant heater.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the coolant heater into the engine block.
Tighten: Tighten the coolant heater to 60 N.m (44 lb ft).
Connect the coolant heater power supply cord to the coolant heater.
Fill the cooling system. Refer to Draining and Filling Cooling System .