LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1723 (Power Seat System) >> Repair Instructions >> Seat Back Replacement - Rear (Folding) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear .
  2. Remove the rear center seat belts. Refer to SEAT BELT REPLACEMENT -- CENTER REAR .
  3. Remove the nut (1) from the child rear seat latch bracket.
  4. Remove the bolts (2) from each end of the latch bracket.
    Fig 1: Latch Bracket Nut & Bolts
    G01617361Courtesy of GENERAL MOTORS CORP.
  5. Fold the rear seat back cushions down.
  6. Remove the bolts from the rear seat latches.
  7. Remove the rear seat latches from the rear seat back.
  8. Fold the rear seat back cushions up.
  9. Reposition the seat belts from the rear seat back.
  10. Remove the rear seat back from the vehicle.
    Fig 2: Rear Seat Back
    G01617362Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals