LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1723 (Power Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear (Non Folding) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat back frame.
  2. Install the rear seat back pad. Refer to Seat Back Pad Replacement - Rear (Folding)  or Seat Back Pad Replacement - Rear (Non Folding) .
  3. Install the rear seat back. Refer to Seat Back Replacement - Rear (Stationary)  or Seat Back Replacement - Rear (Folding) .
    Fig 1: Seat Back Frame
    G01617366Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals