LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1723 (Power Seat System) >> Repair Instructions >> Seat Adjuster Track Cover Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. For power adjusters only, snap the track covers into the rear of the adjusters.
    Fig 1: Snapping Track Covers Into Rear Of Adjusters
    G01617323Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. For manual seat adjusters only, install the track cover screw into the rear of the adjusters.

    Tighten 

    Tighten the screw to 2 N.m (18 lb in).

    Fig 2: Installing Track Cover
    G01617324Courtesy of GENERAL MOTORS CORP.
  3. Install the track covers into the front of the adjusters.
  4. Install the push-in retainer onto the front track cover.
    Fig 3: Front Track Cover
    G01617325Courtesy of GENERAL MOTORS CORP.