LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1722 (Bumper System) >> Repair Instructions >> Impact Bar Replacement - Front Bumper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fascia. Refer to Fascia Replacement - Front Bumper (Chevrolet, GMC)  or Fascia Replacement - Front Bumper (Oldsmobile) .
    2. Fig 1: View Of Fascia-To-Fascia Support Rod Push-Pins
    GM740663Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts (1) that retain the fascia support rods (2) to the impact bar (5).
  3. Remove the fascia support rods from the impact bar.
    4. Fig 2: Removing Bolts Retaining Impact Bar To Frame
    GM740662Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts (1) that retain the impact bar to the frame (2).
  5. Remove the impact bar (3) from the frame.
  6. Remove the tow hooks from the impact bar. Refer to Tow Hook Replacement - Front (Chevrolet (X88) ONLY) in Frame and Underbody.
scientia non olet · About LEMON Manuals