LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1722 (Bumper System) >> Repair Instructions >> Fascia Replacement - Rear Bumper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the backup lamp socket assemblies from the backup lamp housings, if applicable. Refer to BACKUP LAMP REPLACEMENT (GMC) in Lighting Systems.
  2. Fig 1: Removing Lower Fascia Push-Pins
    GM743497Courtesy of GENERAL MOTORS CORP.
  3. Remove the lower fascia push-pins.
  4. Fig 2: Removing Screws From Rear Wheelhouse Flanges
    GM743499Courtesy of GENERAL MOTORS CORP.
  5. Remove the screws from the rear wheelhouse flanges.
  6. Fig 3: Removing Upper Retaining Bolts From Back Of Fascia
    GM743498Courtesy of GENERAL MOTORS CORP.
  7. Remove the upper retaining bolts from the back of the fascia.
  8. Remove the fascia from the vehicle.