Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Wire Connector From Mirror

Courtesy of GENERAL MOTORS CORP.

Use a flat-bladed tool in order to remove the wire connector (1) from the mirror (2), if equipped.
Using a Torx ® screwdriver, loosen the set screw that holds the mirror base to the windshield button.

Fig 2: Sliding mirror Off Of Support

Courtesy of GENERAL MOTORS CORP.

Slide the mirror off of the support.