LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1716 (Stationary Window System) >> Repair Instructions >> Ambient Air Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front grille. Refer to GRILLE REPLACEMENT (GMC) , GRILLE REPLACEMENT (CHEVROLET) or GRILLE REPLACEMENT (OLDSMOBILE) in Exterior Trim.
  2. Fig 1: Removing Sensor From Panel Assembly
    GM713860Courtesy of GENERAL MOTORS CORP.
  3. Remove the sensor (1) from the panel assembly (2).
  4. Fig 2: Disconnecting Electrical Connector From Sensor
    GM769370Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector from the sensor (1).