LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1712 (HVAC Systems - Automatic) >> Repair Instructions >> Blower Motor Processor Replacement - Auxiliary >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right rear quarter trim panel. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT (UTILITY) or TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT (SUBURBAN) .
  2. Disconnect the electrical connector from the auxiliary blower motor processor (1).
  3. Remove the retaining screws from the auxiliary blower motor processor (1).
    4. Fig 1: Identifying Auxiliary Blower Motor Processor & Auxiliary HVAC Module
    GM621723Courtesy of GENERAL MOTORS CORP.
  4. Remove the auxiliary blower motor processor (1) from the auxiliary HVAC module (2).
scientia non olet · About LEMON Manuals