LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1712 (HVAC Systems - Automatic) >> Repair Instructions >> Air Temperature Actuator Replacement - Auxiliary >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Auxiliary Air Temperature Actuator
    GM615126Courtesy of GENERAL MOTORS CORP.
  1. Install the auxiliary air temperature actuator (1) to the auxiliary HVAC module.
  2. NOTE: Refer to FASTENER NOTICE .
  3. Install the auxiliary air temperature actuator retaining screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  4. Connect the electrical connector to the auxiliary air temperature actuator.
  5. Install the right rear quarter trim panel. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT (UTILITY) or TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT (SUBURBAN) .