Removal Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the I/P carrier. Refer to INSTRUMENT PANEL (I/P) CARRIER REPLACEMENT in Instrument Panel, Gages and Console.
- Remove the screws from the mode actuator.
- Remove the mode actuator.
- Remove screws in order to separate the defroster/mode outlet cover (2) from the HVAC module assembly (1).
- Remove the mode door (1) from the heater module.