LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1709 (HVAC Systems - Troubleshooting) >> Repair Instructions >> HVAC Module Pass Thru Seal Replacement - Auxiliary >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: HVAC Pass Thru Seal
    GM816352Courtesy of GENERAL MOTORS CORP.
  1. Install the HVAC pass thru seal (3) to the HVAC module-auxiliary (1).
  2. Install the heater core cover-auxiliary.
  3. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the screws to the heater core cover-auxiliary.

    Tighten:  Tighten the screws to 1.9 N.m (18 lb in).

  5. Install the HVAC Module-Auxiliary. Refer to HVAC Module Replacement - Auxiliary .