Removal Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the I/P trim pad. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER in Instrument Panel, Gages and Console.
- Remove the side window defroster duct (3) retaining screw (4).
- Remove the passenger side window defroster duct.
- Remove the retaining screw (1) from the driver side window defroster duct (4).
- Remove the driver side window defroster duct.
- Release retaining clips (2) from the defroster duct (1).
- Remove the defroster duct (1).