Removal Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the console support bracket. Refer to BRACKET REPLACEMENT - CONSOLE FLOOR in Instrument Panel, Gages and Console.
- Remove the push pin (1).
- Rotate the air outlet duct-rear (3) to remove from the console support bracket (1).
- Remove the air outlet duct-rear from the vehicle.