Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Position the air outlet face down at the housing opening.
- Position the right side of the air outlet below the housing retaining pin.
- Seat the right side of the air outlet to the housing retaining pin by lifting upward.
- Seat the left side of the air outlet to the housing retaining pin.
- Rotate the air outlet upward past the detent position.
- Adjust the air outlet to the original position.