Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the outlet assembly to the I/P.
- Install the retaining screw.
Tighten: Tighten the screw to 2.5 N.m (22 lb in).
- Install the I/P access cover.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.