Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air distributor duct (1) to the instrument panel.
- Install the retaining screws to the air distributor duct.
Tighten: Tighten the screws to 1.9 N.m (17 lb in).
- Install the I/P assembly. Refer to INSTRUMENT PANEL (I/P) ASSEMBLY REPLACEMENT in Instrument Panel, Gages and Console.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.