LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1704 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - Right Front (4 Door) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the seat belt guide loop cover.
  2. Remove the seat belt guide loop nut.
  3. Remove the seat belt guide loop from the guide adjuster bracket.
  4. Remove the lower quarter panel trim. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER LOWER (SEDAN) .
    Fig 1: Seat Belt Guide Loop
    G01617674Courtesy of GENERAL MOTORS CORP.
  5. Remove the seat belt intermediate guide bolts.
    Fig 2: Seat Belt Intermediate Guide Bolts
    G01617675Courtesy of GENERAL MOTORS CORP.
  6. Remove the anchor plate nut from the seat stud.
  7. Remove the anchor plate from the seat stud.
    Fig 3: Anchor Plate Nut
    G01617676Courtesy of GENERAL MOTORS CORP.
  8. Remove the retractor side seat belt bolt.
  9. Remove the retractor side seat belt from the lower center pillar.
    Fig 4: Retractor Side Seat Belt
    G01617677Courtesy of GENERAL MOTORS CORP.