LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1701 (Body Front End) >> Repair Instructions >> Hood Latch Adjustment >> Adjustment Procedure

Adjustment Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the bolts retaining the hood latch to the support bracket.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Move the hood latch from side to side until the striker enters the center of the latch assembly.

    Tighten:  Tighten the bolts retaining the hood latch to the support bracket to 10 N.m (89 lb in).

    Fig 1: Removing/Installing Hood Latch-To-Support Bracket Bolts
    GM749964Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals