LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1701 (Body Front End) >> Repair Instructions >> Hood Hinge Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hood. Refer to Hood Replacement  .
  2. Using a grease pencil or other suitable marking device, mark the location of the hinge(s) (3) to the body.
  3. Remove the bolts (2) that retain the hinge(s).
    Fig 1: Removing/Installing Hood Hinges & Retaining Bolts
    GM740670Courtesy of GENERAL MOTORS CORP.
  4. Remove the hinge(s) from the body.
scientia non olet · About LEMON Manuals