LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1701 (Body Front End) >> Repair Instructions >> Headlamp Housing Panel Replacement (Chevrolet, GMC) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headlamp assemblies. Refer to HEADLAMP REPLACEMENT (TRAILBLAZER) or HEADLAMP REPLACEMENT (BRAVADA) or HEADLAMP REPLACEMENT (ENVOY, ENVOY XUV) in Lighting Systems.
  2. Remove the grille. Refer to GRILLE REPLACEMENT (GMC) or GRILLE REPLACEMENT (CHEVROLET) or GRILLE REPLACEMENT (OLDSMOBILE) in Exterior trim.
  3. Remove the radiator baffle. Refer to Air Intake Baffle Replacement - Radiator  .
  4. Release the clip that retains the ambient temperature sensor to the headlamp panel assembly.
  5. Remove the bolts that retain the headlamp panel assembly to the body.
    Fig 1: Removing/Installing Headlamp Panel Assembly & Retaining Bolts
    GM752279Courtesy of GENERAL MOTORS CORP.
  6. Remove the headlamp panel assembly from the vehicle.
scientia non olet · About LEMON Manuals