LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1701 (Body Front End) >> Repair Instructions >> Air Intake Baffle Replacement - Radiator >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the baffle to the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the bolts that retain the baffle to the body.

    Tighten:  Tighten the air intake baffle bolts to 2 N.m (18 lb in).

  3. Install the push-pin retainers.
    Fig 1: Removing/Installing Radiator Air Intake Baffle, Bolts & Push-Pins
    GM750111Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals