Driveline Working Angles Adjustment: Notes
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Rear axle wind-up may cause launch shudder even when all of the working angles are within specifications. Rear axle wind-up occurs when heavy torque during acceleration causes the pinion nose to point upward. In order to compensate for axle wind-up, the transmission output shaft can be raised slightly. Perform a road test after each shim to determine the affects on the vibration concern. Add shims until the road test indicates that the shudder is eliminated.