LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1696 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the stabilizer shaft insulator clamp mounting bolts.
    Fig 1: Removing/Installing Stabilizer Shaft Insulator Clamp Mounting Bolts
    GM731561Courtesy of GENERAL MOTORS CORP.
  3. Remove the stabilizer shaft insulator clamp from the stabilizer shaft insulator.
  4. Lower the stabilizer shaft and remove the stabilizer shaft insulator.
scientia non olet · About LEMON Manuals