LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1695 (Exterior Trim) >> Repair Instructions >> Grille Replacement (GMC) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a flat-bladed tool in order to release the clips that retain the top of the grille (2) to the body.
  2. Lift the grille (2) out of position.
  3. Release the quick-connect (4) on the headlamp washer supply hose.
    Fig 1: Disconnecting/Connecting Headlamp Washer Supply Hose Quick-Connect
    GM740799Courtesy of GENERAL MOTORS CORP.
  4. Remove the grille from the vehicle.
  5. Place the grille on a clean, prepared surface.
  6. Release the quick-connects (3) on the headlamp washer nozzle hoses.
    Fig 2: Disconnecting/Connecting Headlamp Washer Nozzle Hoses Quick-Connects
    GM740800Courtesy of GENERAL MOTORS CORP.
  7. Spread the retaining tabs (1) on the grille in order to release the headlamp washer nozzle.
  8. Remove the headlamp washer nozzle from the front of the grille.
  9. Remove the headlamp washer hose (4) from the grille.